子空间预测控制在固体氧化物燃料电池中的应用

为使固体氧化物燃料电池(SOFC)输出满足一定约束的稳定电压、提高其输出功率跟踪性能,采用文献中给出的SOFC动态模型,设计了基于子空间矩阵的预测控制器。将子空间辨识和预测控制算法结合起来,直接从开环输入输出数据获得预测控制器的控制矩阵,而不须经过中间参数模型辨识的步骤。仿真结果验证了所提子空间预测控制算法(SPC)的实用性。     

Scheduling parallel dedicated machines with the speeding‐up resource

We consider a problem of scheduling jobs on m parallel machines. The machines are dedicated, i.e., for each job the processing machine is known in advance. We mainly concentrate on the model in which at any time there is one unit of an additional resource. Any job may be assigned the resource and this reduces its processing time. A job that is given the resource uses it at each time of its processing. No two jobs are allowed to use the resource simultaneously. The objective is to minimize the makespan. We prove that the two‐machine problem is NP‐hard in the ordinary sense, describe a pseudopolynomial dynamic programming algorithm and convert it into an FPTAS. For the problem with an arbitrary number of machines we present an algorithm with a worst‐case ratio close to 3/2, and close to 3, if a job can be given several units of the resource. For the problem with a fixed number of machines we give a PTAS. Virtually all algorithms rely on a certain variant of the linear knapsack problem (maximization, minimization, multiple‐choice, bicriteria). © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

利用迭代线性约束最小二乘方法实现不规则阵列的方向图综合

研究了用自适应波束形成技术实现不规则阵列的方向图综合问题,改进了应用于方向图综合的迭代线性约束最小二乘方法,改进后的算法提高了数值稳定性和对随机稀疏阵的适应性。对特定的阵列如果指定的理想方向图无法达到,该算法可以获得最好的逼近。仿真结果验证了算法的性能。     

空间碎片碰撞风险评估模型及其应用

以现有的空间碎片环境模型为基础,建立了一套空间碎片风险评估模型。该模型包括空间碎片环境、航天器有限元建模、几何遮挡处理以及碰撞概率计算四个模块。为了验证风险评估模型的精度及有效性,针对机构间空间碎片协调委员会指定的三种标准工况,将该计算结果与国内外已有的风险评估模型的计算结果进行比较,验证了风险评估模型的正确性。利用开发的风险评估模型,对立方体航天器遭遇空间碎片碰撞风险进行仿真评估与分析,给出了轨道高度、倾角以及航天器自身的姿态参数对航天器遭遇空间碎片碰撞风险的影响特性。     

Complexity and workload considerations in product mix decisions under the theory of constraints

The literature on the product mix decision (or master production scheduling) under the Theory of Constraints (TOC), which was developed in the past two decades, has addressed this problem as a static operational decision. Consequently, the developed solution techniques do not consider the system's dynamism and the associated challenges arising from the complexity of operations during the implementation of master production schedules. This paper aims to address this gap by developing a new heuristic approach for master production scheduling under the TOC philosophy that considers the main operational factors that influence actual throughput after implementation of the detailed schedule. We examine the validity of the proposed heuristic by comparison to Integer Linear Programming and two heuristics in a wide range of scenarios using simulation modelling. Statistical analyses indicate that the new algorithm leads to significantly enhanced performance during implementation for problems with setup times. The findings show that the bottleneck identification approach in current methods in the TOC literature is not effective and accurate for complex operations in real‐world job shop systems. This study contributes to the literature on master production scheduling and product mix decisions by enhancing the likelihood of achieving anticipated throughput during the implementation of the detailed schedule. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 357–369, 2015     

一种基于 TIN 表达的碰撞检测方法研究

在扼要介绍有关碰撞检测方法的基础上 ,着重研究一种基于TIN (TriangulatedIrregularNetwork)表达的物体之间的几何碰撞检测方法。有效地解决了其中的完整性控制问题 ,并在路径规划等系统中得以成功运用。     

坦克射击视景建模与实时动态显示

根据坦克射击视景景物的特征,采用了一种较优越的方案将视景进行分类建模.对景物模型进行简化和各种实时技术处理后,能在微机图形工作站上实时动态显示逼真的坦克射击视景.     

平面内一组线段相对于线光源的可见性

给定平面内一组互不相交的线段 ,将实际光源抽象成有限长度线光源 ,讨论其可见性 ,发现线光源的照射效果等价于线光源两端点的照射效果叠加 ,给出了寻找所有可见边的算法 ,推广了文 [1 ]的结论。     

基于分形几何的信号特征提取技术及其应用研究

针对分形客观展现事物原貌的特点 ,从工程应用的角度分别对信号的分形性验证、有效分析区间的确定、分形性描述和刻画、设备状态的趋势分析等方面作了探讨 ,形成了基于分形几何的信号特征提取技术 ,并描绘出基于分形几何的设备故障诊断模式     

BTT导弹制导律研究综述

与STT导弹相比,BTT导弹在气动效率、机动能力、控制性能等方面具有明显优势,但其运动耦合特性也给传统研究框架下的制导律设计带来了挑战。本文针对BTT导弹制导律设计问题展开研究,首先描述了BTT导弹制导基本问题,分析了BTT导弹制导律设计的技术难点,需要综合考虑运动耦合、多约束、目标机动、弹体动态效应等因素,然后综述了国内外现代制导律设计的基本方法,将其分为双通道解耦法、球坐标法、现代几何法等,最后指出了BTT导弹制导律的进一步研究方向。